A compliant crate for controlled goods cannot legalize an unauthorized shipment. The physical box is the output of compliance planning, not its starting point. Before a single board is cut for controlled goods, the exporter and crating provider should have documented decisions covering item classification, every transaction party’s registration status, transfer documentation, and secure handling protocols. Skip these steps, and the strongest engineered crate in Ottawa becomes evidence of a regulatory failure rather than protection for your asset.
The projects that run smoothly share one characteristic: the compliance work was completed before the equipment arrived at our loading dock. The ones that stall or create legal exposure almost always trace back to assumptions made before anyone talked about wood, foam, or fasteners.
Who This Article Is For
This article is for procurement officers, logistics coordinators, compliance officers, and operations managers at Canadian organizations that ship controlled goods classified under the Defence Production Act. You work for a defence contractor, aerospace manufacturer, high-tech firm, or research facility that handles items requiring Controlled Goods Program registration.
This article is not for:
- Businesses shipping general commercial goods with no controlled classification
- Residential or consumer movers
- Organizations shipping internationally who need export permit guidance (this focuses on domestic transfer compliance)
- Anyone seeking legal advice on specific item classification (consult the Schedule and legal counsel for that)
If your equipment falls under the Schedule to the Defence Production Act and you need to coordinate a compliant shipment to a crating provider, this is the pre-crating compliance sequence you need to complete.
Why Compliance Comes Before the Crate
The Defence Production Act creates clear obligations for anyone who examines, possesses, or transfers controlled goods. The shipper, crating company, and recipient must be registered under the Controlled Goods Program before they can legally touch the equipment, and a carrier that will access the goods must be registered or exempt.
Compliance cannot be retrofitted after physical handling has begun. Once an unregistered person examines controlled goods, the violation has occurred. Once controlled goods transfer to an unregistered party, the breach is complete. The timing is non-negotiable: verify everything before the equipment leaves your facility.
This matters because the penalties under the Defence Production Act are substantial, including fines and potential criminal charges. More practically, it matters because a compliance failure can halt your project, damage your organization’s registration status, and create liability for every party in the chain.
Step 1: Verify Classification Before Anything Else
The first question is not “How should we crate this?” The first question is “Is this item controlled, and under what classification?”
How to Determine If Your Equipment Is Controlled
Consult the Schedule to the Defence Production Act. This Schedule lists the categories of controlled goods in Canada, covering items such as:
- Military vehicles and components
- Firearms and weapons systems
- Ammunition and explosives
- Cryptographic equipment
- Certain aerospace components
- Items with specific military applications
The Export Control List administered by Global Affairs Canada addresses export permits, which is a separate matter from domestic controlled goods transfer. Do not confuse the two.
U.S.-Origin Equipment Adds Complexity
If your equipment originates from the United States or contains U.S.-origin components, it may also fall under ITAR (International Traffic in Arms Regulations) or the U.S. Munitions List. These controls can layer on top of Canadian requirements and create additional obligations for handling, storage, and transfer.
Items classified under ITAR require that all personnel with access hold appropriate citizenship or authorization. This affects who can physically examine the equipment at a crating facility, not just who owns it or signs for it.
Document Your Classification Decision
Create a written record of your classification determination before engaging any service provider. Include:
- The specific Schedule category or subcategory
- The technical parameters that place the item in that category
- Any U.S.-origin content and applicable ITAR/EAR classification
- The name and date of the person making the determination
Misclassification is the most common compliance failure point. A manufacturer’s marketing description is not a classification. A product name is not a classification. The actual technical characteristics of the item, compared against the Schedule, determine classification.
Step 2: Verify Every Party in the Supply Chain Is Registered
Once you confirm your item is controlled, verify that every organization that will examine, possess, or transfer the equipment holds valid Controlled Goods Program registration.
What to Verify
- Organization Registration: The shipper, crating company, carrier (if they will access the goods), and recipient must all be registered under the CGP.
- Personnel Authorization: The specific personnel who will physically handle the goods must be security assessed and authorized by their organization’s Designated Official. The organization’s registration covers these individuals; they do not register on their own.
- Designated Official Status: Each registered organization must have an appointed Designated Official responsible for compliance. Confirm this person is identified and active.
How to Verify Registration
Public Services and Procurement Canada maintains a searchable database of registered organizations. Use this resource to confirm registration status before transferring controlled goods to any party. See the Controlled Goods Program registration requirements for details on the registration process and verification.
Do not assume. A company that built you a crate last year may have let their registration lapse. A carrier that handles defence freight may not have CGP registration because they never access the goods directly. Verify each party for each shipment.
The Unregistered Party Problem
If any party in your supply chain is not registered, you cannot legally transfer controlled goods to them. This is not a paperwork issue that can be sorted out later. An unregistered party in the chain creates immediate non-compliance the moment they examine or possess controlled goods.
This is why registration verification must happen before your equipment leaves your facility. Discovering that your crating provider is unregistered after delivery means the violation has already occurred.
AML Crating Services maintains controlled goods crating services registration under the CGP, allowing us to receive, examine, and handle controlled goods legally. We can provide our registration details during the quote process so your compliance team can verify before scheduling delivery.
Step 3: Confirm Secure Handling and Storage Protocols
Before controlled goods arrive at a crating facility, both parties must confirm that appropriate security measures are in place.
What the Facility Must Have
Every CGP-registered organization must establish and implement a security plan that addresses:
- Physical access controls for the area where controlled goods will be stored
- Security assessments for individuals with access
- Visitor procedures for anyone entering controlled areas
- Storage protocols that prevent unauthorized access
- Incident reporting procedures
We do not publish operational security details, and you should be cautious of any provider who does. The existence of a security plan is verifiable through CGP registration; the specifics are sensitive.
Coordination Before Delivery
Before scheduling delivery of controlled goods to a crating facility, confirm:
- The facility has established and implemented a security plan as a CGP registrant
- The specific personnel who will handle your equipment have been security assessed and authorized by the facility’s Designated Official
- The storage area meets the security plan’s requirements
- Any photography, measurement, or documentation will be handled by authorized personnel only
If controlled goods have U.S.-origin components under ITAR, visual access by unauthorized foreign nationals can constitute a release of controlled technical data. This means the crating provider must control not just who builds the crate, but who can see the equipment during the crating process.
Step 4: Prepare Transfer Documentation
Legal transfer of controlled goods between registered parties requires specific documentation that creates a traceable paper trail.
Documentation Required for Transfer
At minimum, document:
- Item identification: Model, serial numbers, part numbers, quantity
- Classification: Specific Schedule category and any U.S. controls
- Transferor information: Organization, registration number, Designated Official
- Recipient information: Organization, registration number, Designated Official
- Transfer date and time: When possession changed hands
- Personnel involved: Names of the authorized individuals who physically handled the goods
- Chain of custody: A clear record of who had possession at each stage
What Travels With the Shipment
Typically, a transfer document accompanies the controlled goods that identifies the item, classification, sender, and recipient. This is not a commercial packing list; it is a compliance record.
What Stays on File
Both the transferor and recipient must retain records demonstrating compliance. The Defence Production Act requires that records be maintained for inspection. Retain classification documentation, registration verifications, transfer records, and any security-related communications.
Record Retention Period
Canadian regulations require retention of controlled goods records. Under the Controlled Goods Regulations, registered persons keep these records for the whole period of their registration and for five years after it ends. If the controlled goods have U.S.-origin content, ITAR retention requirements may also apply.
Step 5: Complete the Compliance Sequence Before Scheduling Crating
Here is the timing that works:
Before Contacting a Crating Provider
- Complete item classification with written documentation
- Identify all parties who will examine, possess, or transfer the goods
- Verify CGP registration for each organization and confirm the individuals involved are security assessed and authorized
- Confirm any U.S.-origin controls and personnel authorization requirements
During the Quote Process
- Provide classification details so the crating provider can confirm their registration covers the item
- Request the provider’s CGP registration information for your verification
- Discuss security and access protocols for the crating process
- Identify which personnel will handle the equipment
Before Delivery to the Crating Facility
- Complete all verification checks
- Prepare transfer documentation
- Confirm the receiving facility is ready with appropriate security measures
- Coordinate the transfer of custody and documentation handoff
What Cannot Be Fixed Later
If you discover a compliance gap after delivery, the violation has occurred. You cannot:
- Retroactively register a party after they have already possessed controlled goods
- Document a classification after unauthorized personnel have examined the equipment
- Create a transfer record that accurately reflects events that did not happen
The compliance sequence is front-loaded by design. Every check happens before physical handling begins.
Risk Mitigation: Why This Protects Everyone
Proper pre-crating compliance protects both the shipper and the service provider.
For the Shipper
- Avoids penalties under the Defence Production Act
- Protects your organization’s CGP registration status
- Creates an auditable compliance record for defence contracts
- Prevents project delays from compliance failures discovered mid-stream
For the Service Provider
- Confirms we can legally accept and handle the goods before they arrive
- Allows us to assign appropriately authorized personnel
- Ensures our security protocols match the classification requirements
- Creates documentation demonstrating our compliance
For the Project
- Eliminates compliance as a source of delays
- Creates clear accountability at each handoff
- Provides a defensible record if questions arise later
Pre-Shipment Compliance Checklist
Use this checklist before scheduling delivery of controlled goods to a crating provider:
Classification
- Written classification determination on file
- Schedule category identified
- U.S.-origin content and controls identified (if applicable)
Registration Verification
- Shipper organization registration confirmed
- Crating provider organization registration confirmed
- Carrier registration confirmed (if they access goods)
- Recipient organization registration confirmed
- Security assessment and authorization confirmed for all handlers
Security
- Crating facility security plan confirmed
- Personnel access controls confirmed
- Foreign national access restrictions communicated (if applicable)
Documentation
- Transfer documentation prepared
- Chain of custody procedure agreed
- Record retention plan in place
What Comes Next
Once the compliance prerequisites are met, the crating project can proceed. At that point, the focus shifts to engineering protection for your specific equipment, whether that means shock isolation, corrosion barriers, blocking and bracing at approved structural points, or secure closure with documented seals.
But the crate design cannot begin until the compliance foundation is in place. The strongest engineered crate in the world cannot fix a transfer to an unregistered party or a classification that was never documented.
If you have controlled goods that need crating and your compliance work is complete, we can move forward. Request a quote and include your classification details so we can confirm our registration covers your equipment and assign appropriately authorized personnel to your project.
Frequently Asked Questions
Can a compliant crate make an unauthorized controlled-goods shipment legal?
No. The crate is the final result of compliance planning, not a substitute for it. Before the equipment goes to a crating provider, the shipper documents its classification, verifies the registration of every organization involved and the authorization of every individual, and prepares transfer records. Registration must exist before anyone examines, possesses, or transfers controlled goods; it cannot be created retroactively after handling begins.
Which parties must we verify before delivering controlled goods to a crating facility?
Verify the registration of the shipper, crating provider, carrier when it accesses the goods, and recipient. Also confirm that every individual who will physically examine or handle the equipment has been security assessed and authorized by their organization’s Designated Official. Each registered organization should have an active Designated Official and a security plan. Do not rely on a previous shipment or a company’s general defence experience because registration status can change.
What classification information should we prepare before requesting a crate?
Prepare a written determination identifying the applicable Schedule category, technical characteristics supporting that decision, and any U.S.-origin content. For equipment containing U.S. defence articles, also identify relevant ITAR or other U.S. controls and personnel-access restrictions. Product names and marketing descriptions are not sufficient. The classification must reflect the equipment’s actual technical features and intended application.
What transfer records should accompany and support a controlled-goods shipment?
Document the model, serial number, part number, quantity, classification, transferor, recipient, registration details, Designated Officials, transfer date and time, handling personnel, and each custody handoff. A commercial packing list does not replace this compliance record. Retain the classification decision, registration checks, transfer documents, and related communications. The Controlled Goods Regulations require registered persons to keep their controlled goods records for the whole period of their registration and for five years after it ends.
How should we confirm that a crating facility can securely handle controlled goods?
Confirm that the facility has an active CGP registration, a security plan, controlled physical access, and appropriately assessed personnel. Agree in advance how photography, measurements, documentation, visitors, and storage will be managed. For ITAR-related equipment, make sure visual and technical access is restricted to authorized personnel because viewing technical information can create a separate release concern. Verify readiness before delivery, not after arrival.